●High Thermal Conductivity: Provides excellent thermal conductivity of 2.0 W/m.K for efficient heat transfer.
●Low Thermal Resistance: Reduces thermal impedance, enhancing overall thermal management.
●Curing Characteristics: Transforms from a gel to a solid state upon curing, offering secure adhesion and consistent thermal performance similar to thermal silicone pads.
●Excellent Stability: Retains performance across a wide temperature range, ensuring long-term reliability.
●Non-Corrosive and Non-Conductive: Safe for use with delicate electronic components.
●High Dielectric Strength: Offers superior electrical insulation properties.
●Automated Dispensing Compatibility: Suitable for use with automatic dispensing equipment, facilitating precise and efficient application.
| Feature | Value | Unit | Test Method |
| Part A Color | Dark Grey | -- | Visual |
| Part B Color | White | -- | Visual |
| Part A Viscosity | 230000±30000 | Mpa.s | ASTM D2196 |
| Part B Viscosity | 240000±30000 | Mpa.s | ASTM D2196 |
| Density | 2.4(±0.5) | g/cc | ASTM D792 |
| Mixing Ratio | 1:1 | -- | By weight or volume |
| Cure Condition | 24 | H | 25℃ |
| 15 | Min | 100℃ | |
| Thermal Conductivity | 2.0(±0.2) | W/M·K | ASTM D5470 |
| Color | Grey | -- | Visual |
| Thermal Impedance | ≤1.0 | ℃-in2/W | ASTM D5470 |
| @20psi&1mm | |||
| Hardness | 35±5 | Shore C | ASTM D2240 |
| Tensile Strength | ≥0.1 | MPa | ASTM D412 |
| Extension Rate | ≥100% | % | ASTM D412 |
| Flammability Rating | V-0 | -- | UL 94 |
| Working Temperature | -50~160 | ℃ | IEC 60068-2-14 |
| Breakdown Voltage | ≥10 | Kv/mm | ASTM D149 |
| Volume Resistivity | ≥1012 | Ω·cm | ASTM D257 |
| Dielectric Constant | ≥2 | @1MHz | ASTM D150 |
| Dielectric loss | ≤0.1 | @1MHz | ASTM D150 |
