● Superior Thermal Conductivity: Delivers outstanding thermal conductivity of 3.0 W/m.K enabling efficient heat transfer
●?Reduced Thermal Resistance: Lowers thermal impedance optimizing thermal performance
●?Curing Transition: Changes from a pliable gel to a solid state upon curing creating a stable and robust thermal interface
●?Thermal and Mechanical Stability: Maintains consistent performance across a wide temperature range and under various operating conditions
●?Safe for Electronics: Non-corrosive and electrically insulating safeguarding sensitive components
●?Enhanced Dielectric Properties: Provides excellent electrical insulation
●?Automated and Manual Application: Designed to be compatible with both automatic dispensing equipment and manual application methods for flexibility in usage1、Surface Preparation: Thoroughly clean surfaces to remove any dust oil or other contaminants
2、Component Mixing: Mix the two components in the prescribed ratio until a uniform consistency is achieved
3、Application Process: Dispense the mixed gel evenly onto the target surfaces using an automated dispensing system or manually
| Feature | Value | Unit | Test Method |
| Part A Color | Light blue | -- | Visual |
| Part B Color | White | -- | Visual |
| Density | 2.9 (±0.5) | g/cc | ASTM D792 |
| Mixing Ratio | 1:1 | -- | By weight or volume |
| Cure Condition | 24 | H | 25℃ |
| 15 | Min | 100℃ | |
| Thermal Conductivity | 3.0(±0.2) | W/m·K | ASTMD5470 |
| Color | Blue | -- | Visual |
| Thermal Impedance | ≤0.9 | ℃-in2/W | ASTMD5470 |
| @20psi&1mm | |||
| Hardness | 35 | Shore C | ASTM D2240 |
| Tensile Strength | ≥0.15 | MPa | ASTM D412 |
| Extension Rate | ≥70 | % | ASTM D412 |
| Flammability Rating | V-0 | -- | UL 94 |
| Working Temperature | -50~160 | ℃ | IEC60068-2-14 |
| Breakdown Voltage | ≥10 | Kv/mm | ASTM D149 |
| Volume Resistivity | ≥1012 | Ω·cm | ASTM D257 |
| Dielectric Constant | ≥2 | @1MHz | ASTM D150 |
| Dielectric loss | ≤0.1 | @1MHz | ASTM D150 |
