How to build a solar plant? Many customers have this idea, but they don’t know what machine they need, so the project did not start.
So, What Machines are Included in 50-60MW Solar Panel Making Process Manufacturing Solar Panels?
Interconnection Soldering Machine
Function:
Use to test the electrical performance of Mono-Si or Poly-Si solar cell pieces and record the results in files.
Picture:
Function:
Solar cell laser cutting machine(damage free) cuts solar cell into half piece or /3 piece，which can increase the output of the solar panel power.
Solar cell laser cutting machine(damage free) is with lower power, lower temperature, and water-free dicing, and also has higher bending strength, better electrical performance, and no secondary pollution or water-caused micro-broken after cutting.
Picture:
Function:
Solar cell stringer machine is to weld the solar cells one by one through copper ribbon, and the cells are connected in series to form a string. The entire welding process is fully automated.
Function:
Achieving solar string automatic laying on glass EVA, and transporting module to the next process
Interconnection Soldering Machine
Function:
Adopt the method of separating the cell string from the glass, and grab the cell string in the air, then to interconnected solder the head, middle and tail bus bar of the middle wire edition module at a certain height; It has the function of a roll feeding bus bar, bending U and L leads upwards.
Function:
Used in testing the solar cell crack，breakage, black spot，mixed wafers，process defect，cold solder jointphenomenon.
Function:
Solar panel laminating machine is a mechanical device that presses multiple layers of materials together.
Function:
Used to install the aluminum frame and automatically overflow glue.
Function:
Solar panel IV tester is used to test the electric performance of Mono-Si or Poly-Si solar modules and record the results in files .
