Fire Alarm Control Panel FW106/FW106C Intelligent Fire Detection System for Commercial Industrial Applications

Fire Alarm Control Panel FW106/FW106C Intelligent Fire Detection System for Commercial Industrial Applications

  • Fire Alarm Control Panel FW106/FW106C Intelligent Fire Detection System for Commercial Industrial Applications
  • Fire Alarm Control Panel FW106/FW106C Intelligent Fire Detection System for Commercial Industrial Applications
  • Fire Alarm Control Panel FW106/FW106C Intelligent Fire Detection System for Commercial Industrial Applications
  • Fire Alarm Control Panel FW106/FW106C Intelligent Fire Detection System for Commercial Industrial Applications
  • Fire Alarm Control Panel FW106/FW106C Intelligent Fire Detection System for Commercial Industrial Applications
  • Fire Alarm Control Panel FW106/FW106C Intelligent Fire Detection System for Commercial Industrial Applications
Summary
Fire Alarm Control Panel FW106/FW106C is an intelligent fire detection system designed for commercial, industrial, and institutional facilities. Offering advanced fire detection and notification capabilities, this panel supports both new and retrofit applications with high reliability and flexibility. Featuring a digital signal processor, fully configurable front panel, password protection, and compatibility with multiple circuits and devices, it ensures optimal performance in small to medium-scale fire safety systems. Ideal for use in energy-efficient buildings and industrial fire protection environments.More
  • Fire Alarm Control Panel FW106/FW106C Intelligent Fire Detection System for Commercial Industrial Applications
  • Fire Alarm Control Panel FW106/FW106C Intelligent Fire Detection System for Commercial Industrial Applications
  • Fire Alarm Control Panel FW106/FW106C Intelligent Fire Detection System for Commercial Industrial Applications
GeneralDigital signal processor based design, fully configurable from front panel with password protection
Environmental
  • Operating temperature : 32 - 120°F (0 - 49°C)
  • Relative humidity : Up to 93% @ 90°F (32°C)
  • To be installed in normal dry indoor environment only
Primary Supply
  • 110 - 120 VAC 60Hz (3.86A), or
  • 220 - 240 VAC 50Hz (1.96A)
Secondary Power Supply
  • Two 12V in series lead-acid batteries set
  • Charging capacity: 40AH
Power OutputsInternal power supply for
  • AMI
  • ALUs and Addressable Loop Circuits
  • NOUs and Notification Appliance Circuits
  • XNUs, External Network Circuits
  • ROUs
One auxiliary power supply
  • Non-Resettable/Resettable Power Output (configurable)
  • Power limited
  • 24VDC
  • Output current: 500mA in normal standby, 1200mA in alarm
  • Power Factor Rating: 0.35
  • Special application: Compatible devices are the Annunciator Model FW121 / FW121C /FW122W / FW122R / FW122CW / FW122CR and IO Module Model FW821.
Relays Output
  • One programmable relay
  • 4 non-programmable status relays
  • Status: Alarm, Supervisory, Trouble, Monitor
  • Form C Contact
  • Contact Rating: 2A 30VDC
  • Power Factor Ration:0.35
Notification Appliance Circuits
  • Total of 4 circuits supported, total power available 8A
  • 2 Class A or 2 Class B circuits on each NOU
  • Maximum Current: 2A per NAC circuit
  • Alarm Voltage: 24V nominal
  • Bell code: Temporal 3
  • Panel supports one regulated 24 VDC NAC, or four specialapplication24VDC NAC. Refer to Table 20 for specific appliances/devices.
  • Max line loss: 1.8 V.
Network Circuit
  • Class B circuit
  • For up to 110 panels and/or remote annunciators connection
  • Communications protocol: CAN
  • Max. line capacitance = 0.05 uF
  • Max. line resistance = 25 Ohm
Addressable Loop Circuits
  • Maximum Current (short ): 0.4A
  • Class A/Class B circuit
  • 252 addresses: detectors and modules max
  • Output voltage range: 20.2V ~ 26.2V
  • Maximum normal standby current: 100mA
  • Maximum alarm current: 220mA
  • Max. line capacitance = 0.1 uF
  • Max. line resistance = 10 Ohm
UL Fire Safety System, EN Fire Safety System, Automatic Fire Alarm System, Small-area Fire Safety System, Gaseous Suppression and Control System, Fire Door Monitoring System, Electrical Fire Monitoring System, Power Supply System for Fire Protection Equip
Contact Supplier
Download
REQUEST MORE DETAILS
Please fill out the form below and click the button to request more information about
Fill out the form below to make an inquiry
Company*
Country/Region*
FirstName*
LastName*
Email*
Whatsapp/Phone*
Product Description*
Verification code*
We needs the contact information you provide to us to contact you about our products and services.
If your supplier does not respond within 24 hours, we will connect you with three to five qualified alternative suppliers.
我們使用 Cookie 來改善您的線上體驗。 繼續瀏覽本網站,即表示您同意我們使用 Cookie